If it is not running, check all USB ports on the PC and verify that the MDI is powered on. Then check for the device name ETAS USB Remote NDIS Network Device. Open the Network and Dial-up Connections Window from the Windows Control Panel. About the solutions,you can connect the MDI to the PC USB port and power up the MDI. If the MDI can not communicate with the MDI, you should check the cables if they are securely attached to the MDI, if the MDI has completed its power up sequence, if the connector pins are clean and if the MDI Manager software is running.Īnd if you connect them by using USB, you need to check the MDI USB connection is detected by windows. If the USB is available, the MDI will connect by using the USB and if not, the MDI will connect by using wired ethernet and if neither of them is available, the MDI will connect by using wireless.
Also the MDI should be configured for wired ethernet or wireless communication. Let’s see what you can do when it can’t communicate.įirst, you should make sure that the MDI Manager software should be installed on the PC and the MDI must be powered up before you use it to communicate. When you use GM MDI on a PC, you may meet some trouble.
0 kommentar(er)
